Where to go?
pi@raspberrypi:~/sx1302_hal/bin $ sudo ./chip_id -u -d /dev/ttyACM0
Opening USB communication interface
ERROR: failed to open COM port /dev/ttyACM0 - No such file or directory
ERROR: failed to start the gateway
pi@raspberrypi:~/sx1302_hal/bin $ sudo ./chip_id -d /dev/spidev0.0
CoreCell reset through GPIO23…
SX1261 reset through GPIO23…
CoreCell power enable through GPIO18…
CoreCell ADC reset through GPIO13…
Opening SPI communication interface
Note: chip version is 0x00 (v0.0)
ERROR: Failed to set SX1250_0 in STANDBY_RC mode
ERROR: failed to setup radio 0
ERROR: failed to start the gateway
